we are trying best to make the floor of our home look great at very low cost. Today we show you how to make a 3D epoxy floor, the example in a piece of wood. Epoxy flooring using coating over your concrete floors will create a high gloss, hard wearing, durable surface. Epoxy coating uses a chemical mix of two liquid components, epoxy resin and hardener, to create a tough finish that can be applied to counter tops and floor.
How apply a 3D epoxy floor on a piece of wood
- Fiand a 3D image.
- Glue and paste it on the board.
- Select a clean, smooth, textured, primed image and paste it on top
- Make sure that no air is trapped under the poster to avoid wrinkles.
- Poster is properly placed on the substrate.
- If you find the wrinkles on the poster, use a blow dryer to dry the wood and glue on the bottom. It will be easy to sort and fix the wrinkles.
- Take the time and apply the wallpaper slowly to avoid wrinkles.
- Use something soft to prepare the poster.
- The poster has dried into substrate mix the resin for one or two minutes and pour this mixture over the top of 3D.
- Make sure that resin goes everywhere.
- Use a blow dryer to eliminate bubbles.